In this video, we show you how easy it is to install the executive office chair 5756. Read the full guide below for more detailed instructions.
Attach Base Tube
Insert the split base tube(J1) into the central base tube(J2). Align with the holes on both sides, tighten them with the provided screws(K) with the Allen wrench(G).
Install Castors & Gas Lift
Insert 5 Castors(F) to the base tube(J) installed in step 1 and press them in firmly. Then, insert the gas lift(E) into the designated slot at the center of the base.
*Caution: Confirm 5 Castors must be inserted deeply. Otherwise the castors could easily fall out and the chair could fall down.
Attach The Mechanism
Fasten the mechanism(D) to the underside of the seat cushion(B) using the supplied screws(L) with the Allen wrench(G), ensuring precise alignment with FRONT sticker for optimal stability.
Attach Armrests
Fix the 2 Armrests(C) to the two sides of the Seat Cushion, tighten them with the provided screws(I) with the Allen wrench(G). Insert the backrest(A) between the 2 Armrests align the holes then press the armrests in and fasten them with the provided screws(I) with the Allen wrench(G).
*Caution: As the chair is heavy it is better for two people to put the backrest into the middle of the armrests together.
Attach Caps & Connect Seat
Cover the screw holes on both sides of 2 armrests with the decoration caps(H). And place seat onto gas lift.
Assembly is now complete!
