In this video, we show you how easy it is to install the gaming chair 5713B. Read the full guide below for more detailed instructions.
Install Castors & Gas Lift
Rotate and press the 5pcs castors(H) hard into the 5 star base(G). Then, insert the gas lift(E) into the designated slot at the center of the base, put the cover(D) onto the gas lift.
*Caution: Confirm 5 Castors must be inserted deeply. Otherwise the castors could easily fall out and the chair could fall down.
Attach The Mechanism & Connect Seat
Fasten the mechanism(F) to the underside of the seat cushion(C) using the supplied screws(P) with the Allen wrench(M), ensuring precise alignment with FRONT sticker for optimal stability.
Position the seat cushion onto the installed gas lift mechanism, ensuring a secure fit.
Mount Armrests
Secure the armrests(I) to the designated locations on both sides of the seat cushion(C) using the provided screws(Q) with the Allen wrench(M).
Install Backrest
Utilize the provided screws(R) to securely fasten the backrest(A) to the sides of the armrests, but don't screw them too tight, initially leaving them slightly loose. Tighten the screws(S) on both sides and cover the screw hole with the decoration parts(K).
Install Headrest
Connect the headrest(B) with the backrest, tighten the screws(O) and cover the screw hole with the decoration parts(J).
Footrest
Please remove the screws from the footrest cushion first, then tighten them. Cover the screw holes on both sides of 2 armrests with the decoration caps.
Assembly is now complete!
