How To Assemble 6007 Office Chair

Jun 22, 2024

In this video, we show you how easy it is to install the office chair 6007. Read the full guide below for more detailed instructions.

 

Attach Base Tube

Insert the split base tube(S1) into the central base tube(S2). Align with the holes on both sides, tighten them with the provided screws(T) with the Allen wrench(L).

 

Install Castors & Gas Lift

Insert 5 Castors(J) to the base tube(S) installed in step 1 and press them in firmly. Then, insert the gas lift into the designated slot at the center of the base.

*Caution: Confirm 5 Castors must be inserted deeply. Otherwise the castors could easily fall out and the chair could fall down.

 

Mount Armrests

Secure the armrests(E) to the designated locations on both sides of the seat cushion(F) using the provided screws(O) with the Allen wrench(L), but don't screw them too tight, initially leaving them slightly loose.

 


Attach The Mechanisms

Fasten the mechanism(K) to the underside of the seat cushion using the supplied screws(U) with the Allen wrench(L), ensuring precise alignment with FRONT sticker for optimal stability.

 

Install The Keel

Connect the keel(B) to the mechanism, tighten the screws(P) with the Allen wrench(L).

 

Place Seat onto Gas Lift

Position the seat cushion onto the installed gas lift mechanism, ensuring a secure fit.

 

Install Backrest

Utilize the provided screws(M) with the Allen wrench(L) to securely fasten the backrest(A) to the keel. 

 

Install Lumbar Support

Connect the lumbar support(C) to the keel, tighten the screws(Q) with the Allen wrench(L) on the both side of the keel.

 

Install Headrest

Use screws(R) with the Allen wrench(L) to connect the headrest(D) to the backrest, and cover the screw holes with the decoration parts(H, G).

 

Assembly is now complete!